DIRECT LIQUID HEATING
Water Heater Immersion Rod
Water Heater Immersion Rod manufactured by LICHENGDA with custom voltage, wattage, dimensions, materials and termination options for industrial applications.
ENGINEERING GUIDANCE
Specify this product correctly
A replaceable immersion format for tanks and vessels. Specify connection thread or flange, insertion depth, electrical rating and the water chemistry expected during service.
Final voltage, wattage, dimensions, material and termination are reviewed against your operating conditions before production.
- ✓ Threaded plug or flange mounting
- ✓ Single-phase and three-phase configurations
- ✓ Optional thermostat or temperature sensor
- ✓ Material selected for liquid compatibility
REFERENCE SPECIFICATIONS
Available configuration
| Voltage | 220 / 380 V or custom |
|---|---|
| Power | 3–15 kW typical |
| Mounting | Threaded plug / flange |
| Sheath | Stainless steel / Incoloy / copper |
| Applications | Water, oil, tanks, boilers, process baths |
TYPICAL APPLICATIONS
Where this product is used
- Water and oil tanks
- Boilers and process vessels
- Industrial liquid heating
QUOTE CHECKLIST
Send these details
- Required voltage and wattage
- Dimensions or technical drawing
- Operating temperature and environment
- Lead, connector and mounting requirements
- Sample and production quantity
Product image gallery (7)
PRODUCT ENGINEERING
Wetted material and minimum liquid level
Water Heater Immersion Rod: Select the sheath against the actual liquid chemistry, concentration and operating temperature. Confirm insertion length and thread or flange geometry from the tank drawing.
Keep the active section submerged during operation. Review liquid-level and independent temperature protection, sediment buildup and access for scale removal before commissioning.
For Water Heater Immersion Rod, request the missing voltage, power and finished dimensions before calculating current, selecting a supply or fixing the mounting pattern.
For Water Heater Immersion Rod, send the supply, continuous and peak temperature, mounting drawing, lead exit and quantity. Include the heated medium and control method so the quoted configuration can be checked against the actual duty.
Application and reference configuration
Tanks and process vessels. The final suitability of Water Heater Immersion Rod depends on the assembled equipment and agreed operating conditions.
Archived figures below describe reference options or a product series. Confirm the exact model specification in the quotation.
| 220V 3KW | 210mm |
|---|---|
| 220V 6KW | 250mm |
| 220V 9KW | 300mm |
| 220V 12KW | 350mm |
| 220V 15KW | 600mm |
ARCHIVED PRODUCT INFORMATION
Description
Screw Plug Immersion Heaters are screwed directly through a threaded opening in a tank wall or through a matching pipe coupling or half coupling. Sizes of screw plug heaters are available with 1", 1-1/4", 1-1/2", 2", 2-1/2" pipe threads. A wide selection of screw plug sizes, kilowatt ratings, voltages, sheath materials,terminal enclosures and thermostats makes these compact heaters ideal for all types of applications.
| Voltage/Power | Tube length |
DN40( Dia 47mm) DN50( Dia 58mm) |
| 220V 3KW | 210mm | |
| 380V 3KW | ||
| 220V 6KW | 250mm | |
| 380V 6KW | ||
| 220V 9KW | 300mm | |
| 380V 9KW | ||
| 220V 12KW | 350mm | |
| 380V 12KW | ||
| 220V 15KW | 600mm | |
| 380V 15KW |
immersion heateris an electric heating element that is designed to be immersed in a liquid, such as water or oil, to heat it up. It is typically used in household water heating systems, such as in hot water tanks or boilers, or in industrial processes where liquids need to be heated for various purposes.
The immersion heater consists of a heating element, usually made of a metal alloy such as copper or stainless steel, which is insulated from the surrounding liquid by a sheath or tube made of a material that is resistant to corrosion and heat. The heating element is connected to an electrical power supply via a cable, and when the power is switched on, the element heats up and begins to transfer heat to the surrounding liquid.
Immersion heaters are available in a variety of sizes and power ratings, depending on the application requirements. They are typically controlled by a thermostat or a temperature sensor, which monitors the temperature of the liquid and switches the heater on or off to maintain the desired temperature.
Immersion heaters are easy to install and maintain, and they are a popular choice for heating water in households and in industrial processes where a continuous supply of hot water is required. However, they can be expensive to run if used continuously, and care should be taken to ensure that they are properly installed and used in a safe manner to avoid the risk of electric shock or fire.
Key Features:
Heating Element: Typically made of materials like copper, stainless steel, or Incoloy, which are resistant to corrosion and high temperatures.
Thermostat: Many immersion heaters include a thermostat to regulate temperature and prevent overheating.
Portable or Fixed: Some are portable and can be moved between containers, while others are fixed permanently in tanks or boilers.
Power Source: Operates on electricity, with varying wattages depending on the required heating capacity.
Common Uses:
Domestic Hot Water: Heating water in homes, especially in areas without centralized hot water systems.
Industrial Applications: Heating liquids in tanks, boilers, or process equipment.
Laboratory Use: Precise heating of liquids in scientific experiments.
Emergency Heating: Used as a backup heating source during power outages or when primary systems fail.
Advantages:
Efficiency: Directly heats the liquid, minimizing heat loss.
Simplicity: Easy to install and use.
Versatility: Can be used in various containers and for different liquids.
Uniform heating, high thermal efficiency, rapid heating, rapid heat conduction, seamless steel pipe,
corrosion and rust resistance
Company profile
Xiamen Lichengda Precision Manufacturing Co., Ltd. was established in 2 0 1 2 year. It is a
comprehensive company integrating production, sales and technical service. the factory covers an
area of 5000m2, has nearly 100 employees. Applicable quality-system and product-compliance documentation must be confirmed for the quoted product, legal entity and current scope.
Main products : cartridge heater,Tubular heater, Flexible heater, cartridge heater,silicone heater
thermocouple, heating element, and other heating products. The factory introduced advanced
automatic control system and online quality,inspection system to ensure the stability and reliability
of product quality
1. Qucik Response:Your inquiry will be replied within 24 hours. Response Rate over 90%
2. Smooth Communication: Well-trained and experienced staffs to answer all your inquires.
3. Sincere Service Attitude: Treat Customers As Friends. No Questions are Neglected.
4. OEM Accepted: Free Sample,We can customize your products to meet all your different requests.
5. Small MOQ: Small Amount wholesales are supported to meet your needs as well as large demands.
6. Fast Delivery: We have Reliable Forwarders with long term cooperation and Competitive Price.
You may contact any one of our sales and services team: email to us as inquiry.
Hot Tags: water heater immersion rod, China, manufacturers, suppliers, factory, wholesale, customized, cheap, in stock, free sample, Air Tubular U Shape Heating Element, electric immersion water boiler heating element, Electric Industrial Toaster Oven Heating Element, industrial immersion tubular heater, Tubular Air Finned Heater Element, Water Immersion Heater Element
Specifications and availability vary by configuration. Confirm dimensions, materials and electrical or measurement ratings in your quotation.
ENGINEER-REVIEWED QUOTATION