THIN, LIGHT & UNIFORM
Silicone Rubber Heater Electric
Silicone Rubber Heater Electric by LICHENGDA. Surface contact and flexible circuit layout, configuration details and made-to-drawing quotation for surface warming and compact equipment assemblies.
PRODUCT ENGINEERING
Surface contact and flexible circuit layout
Silicone Rubber Heater Electric: Define the heated outline, substrate material and mounting method. Continuous contact supports uniform heat transfer; air pockets, folds or partial bonding can produce local hot spots.
Keep the active circuit clear of fasteners and sharp bends. Confirm adhesive compatibility, lead strain relief and sensor location at the substrate rather than selecting power from pad area alone.
For Silicone Rubber Heater Electric, request the missing voltage, power and finished dimensions before calculating current, selecting a supply or fixing the mounting pattern.
The archived configuration for Silicone Rubber Heater Electric lists Power density: 0.10~1.50w/cm²; External insulation material: Silicone glass fiber; Voltage: 3.7-660V. Treat these as reference options and reconcile them with the named configuration and installation drawing before quotation.
For Silicone Rubber Heater Electric, send the supply, continuous and peak temperature, mounting drawing, lead exit and quantity. Include the heated medium and control method so the quoted configuration can be checked against the actual duty.
Application and reference configuration
Surface warming and compact equipment assemblies. The final suitability of Silicone Rubber Heater Electric depends on the assembled equipment and agreed operating conditions.
Archived figures below describe reference options or a product series. Confirm the exact model specification in the quotation.
| Electric resistance precision | ±10%( bigger value selected) |
|---|---|
| Power density | 0.10~1.50w/cm² |
| Mechanical pressure | 100.00kg/cm² |
| Minimum bending radius | 3.20mm |
| External insulation material | Silicone glass fiber |
| Internal heating element | Ni-Cr alloy |
| Thickness | 1.5mm-3mm(With 3M) |
| Voltage | 3.7-660V |
ARCHIVED PRODUCT INFORMATION
Description
|
silicone heater is a flexible heating element made of a silicone rubber material that is designed to provide uniform and efficient heat transfer in a wide range of applications. The heating element consists of a resistance wire, such as nickel-chromium or copper-nickel, that is embedded in a silicone rubber substrate, which is then bonded to a thin layer of fiberglass or other insulating material.
Imported silicone heating temperature of 200 ℃, more durable, and longer service life; Domestic silicone heating temperature of 180 ℃, economical and cost-effective;
The shape can be customized arbitrarily, and insulation layer,USB interface, 3.7V battery, thermocouple wire and thermistor can be added (PT100 NTC 10K 100K 3950%)
Specifications: 1. Length: 15-10000mm, width: 15-1200mm; Lead length: default 1000mm or custom 2. Circular, irregular, and special shapes can be customized. 3. The default does not include 3M adhesive backing 4. Voltage: 5V/12V/24V/36V/48V/110V/220V/380V, etc., can be customized. 5. Power: 0.01-2W/cm can be customized, conventional 0.4W/cm,this power density temperature can reach around 50 ℃, with low temperature for low power and high temperature for high power
Digital temperature control: Temperature control range -45 ℃~220 ℃. It can maintain a constant temperature or a temperature range, and the temperature can be adjusted
Knob temperature control: commonly used temperature ranges are 0-40 ° C, 0-60 ° C, 0-120 ° C, 30-110 ° C, 30-150 ° C, 50-200 ° C etc. Temperature adjustment can be installed at any position on the heating plate, with average temperature control accuracy, suitable for insulation and antifreeze industries that do not require high temperature control accuracy.
Constant temperature control: also known as temperature switch/overheat protector. Generally, there is a temperature range of 5 ℃, with commonly used temperatures including 5 ℃, 10 ℃, 20 ℃, 30 ℃, 40 ℃, 45 ℃, 50 ℃... 180 ℃, etc. The temperature can be adjusted but not adjustable. It can be installed at any position on the heating plate and cannot be externally connected. The temperature control accuracy is average, suitable for insulation and antifreeze industries that do not require high temperature control accuracy.
Company profile
Xiamen Lichengda Precision Manufacturing Co., Ltd. was established in 2 0 1 2 year. It is a comprehensive company integrating production, sales and technical service. the factory covers an area of 5000m2, has nearly 100 employees. Applicable quality-system and product-compliance documentation must be confirmed for the quoted product, legal entity and current scope. Main products : cartridge heater,Tubular heater, Flexible heater, cartridge heater,silicone heater thermocouple, heating element, and other heating products. The factory introduced advanced automatic control system and online quality,inspection system to ensure the stability and reliability of product quality
1. Qucik Response:Your inquiry will be replied within 24 hours. Response Rate over 90% |
Hot Tags: silicone rubber heater electric, China, manufacturers, suppliers, factory, wholesale, customized, cheap, in stock, free sample, 12v pad flexible silicone heater heating, silicone rubber heater heating belt band, Flexible Silicone Heating Pad Heater, 200l Oil Drum Heater Blanket, Silicone Rubber Heating Strip, silicone rubber 55 gallon drum heater
Specifications and availability vary by configuration. Confirm dimensions, materials and electrical or measurement ratings in your quotation.
ENGINEER-REVIEWED QUOTATION