Cartridge Heater With K Type Thermocouple

PRODUCT ENGINEERING

Bore fit and conductive heat transfer

Cartridge Heater With K Type Thermocouple: Install the active sheath in a close-fitting, clean bore. Specify bore diameter, tolerance and heated length together; excessive clearance increases sheath temperature and slows heat transfer.

Record the lead exit, cold end and removal access before the tool is machined. Locate the control sensor near the heated zone without placing it directly against the resistance element.

For Cartridge Heater With K Type Thermocouple, request the missing voltage, power and finished dimensions before calculating current, selecting a supply or fixing the mounting pattern.

The archived configuration for Cartridge Heater With K Type Thermocouple lists Resistance heating wire: NiCr 80/20 wire; Tube diameter: Min is 3mm, max is 30mm; Tube length: Min is 15mm max is 3 meter.; Voltages available: 380V, 240V, 220V, 110V, 36V, 24V or 12V. Treat these as reference options and reconcile them with the named configuration and installation drawing before quotation.

For Cartridge Heater With K Type Thermocouple, send the supply, continuous and peak temperature, mounting drawing, lead exit and quantity. Include the heated medium and control method so the quoted configuration can be checked against the actual duty.

Application and reference configuration

Molds, dies and conductive tooling. The final suitability of Cartridge Heater With K Type Thermocouple depends on the assembled equipment and agreed operating conditions.

Archived figures below describe reference options or a product series. Confirm the exact model specification in the quotation.